UZIN KE 2000 S

Pressure-sensitive adhesive with excellent bond-strength for resilient floor coverings

  • pressure-sensitive adhesive with strong thread-formation
  • wide range of uses
  • can be used semi-wet, double drop or as a contact adhesive
  • extremely reliable adhesion

Applications:

  • for PVC and cushioned vinyl, and also PVC-Design flooring
  • for rubber sheet flooring (up to 4 mm)
  • for luxury vinyl tiles  
  • for rubber tile flooring (up to 2.5 mm)
  • for polyolefine (PO) flooring
  • for polyurethane (PU) sheet flooring (up to 2.5 mm)
  • on absorbent and non-absorbent surfaces
  • on UZIN Multibase as well as UZIN insulating and installation underlays

Properties:

    • as a wet, pressure-sensitive or contact adhesive
    • high coverage
    • very long working time, up to 2 hours
    • high early and final strength
    • very easy to apply
    • short open time
    • GISCODE D1 / solvent-free
    • EMICODE EC1 PLUS / very low emission PLUS
    • RAL UZ 113 / environmentally compatible because of very low emission

UZIN KE 66

High temperature adhesive for PVC, rubber & luxury vinyl tiles*

  • hard adhesive ridges, ideal for coverings with low dimensional stability
  • fibre-reinforced increasing reliability
  • wet-bed adhesive for quick installation

Applications:

  • for rubber tile flooring (up to 4.0 mm)
  • for PVC & luxury vinyl tiles
  • on prepared surfaces with good absorbency
  • for normal wear use in commercial and project work
  • for areas with high temperatures*

Properties:

  • very low consumption
  • short open time, up to 25 minutes
  • high dimensional stability
  • interior use only
  • solvent-free

Rococo – Technical

The following UZIN adhesives are recommended for bonding the LVT Rococo in planks:

UZIN KE 66

Highly shear-resistant PVC and rubber adhesive with hard adhesive ridges with maximum requirements on room air quality, GISCODE D 1 – solvent-free, EMICODE EC 1 PLUS – very low emission, Leed contributed. A 2 ~ 280

UZIN KE 2000 S

Wet-bond, pressure-sensitive or contact dispersion adhesive with very high adhesion. Long working time, very high bond-strength and excellent plasticizer resistance. GISCODE D 1 – solvent-free, EMICODE EC 1 PLUS – very low emission A 2 250 – 320

General Recommendation
Gypsum and cement based subfloors which meet the requirements of the local standards and floor manufacturer. The humidity of the subfloor is to be respected!
− Fine grinding, grit paper size 16
− Vacuum off
− UZIN PE 360 PLUS or UZIN PE 360 NEW application with a UZIN Nylon Fibre Roller, 25 cm/14 mm, consumption 80-150 g/m²
− UZIN NC 170 LevelStar, consumption approx. 3,0 kg/m² 2 mm layer thickness
− Fine grinding, grit paper size 60
− LVT Rococo.

Athena – Technical

The following UZIN adhesives are recommended for bonding the woven PVC Athena in tiles and sheets:

UZIN KE 66

Highly shear-resistant PVC and rubber adhesive with hard adhesive ridges with maximum requirements on room air quality, GISCODE D 1 – solvent-free, EMICODE EC 1 PLUS – very low emission, Leed contributed A 2 ~ 280

UZIN KE 2000 S

Wet-bond, pressure-sensitive or contact dispersion adhesive with very high adhesion. Long working time, very high bond-strength and excellent plasticizer
resistance. GISCODE D 1 – solvent-free, EMICODE EC 1 PLUS – very low emission A 2 250 – 320

General Recommendation
Gypsum and cement based subfloors which meet the requirements of the local standards and floor manufacturer. The humidity of the subfloor is to be respected!
− Fine grinding, grit paper size 16
− Vacuum off
− UZIN PE 360 PLUS or UZIN PE 360 NEW application with a UZIN Nylon Fibre Roller, 25 cm/14 mm, consumption 80-150 g/m²
− UZIN NC 170 LevelStar, consumption approx. 3,0 kg/m² 2 mm layer thickness
− Fine grinding, grit paper size 60
− Woven PVC Athena in tiles and sheets.